Designed, produced and installed in NorwichCall 01603 987222
LoginBasket
F1 stock car with a teal, orange and white geometric livery on the roof wing and body, cornering on a sunny oval
Graphics & wrapping · Norwich & Norfolk

BriSCA F1 Stock Car Graphics

Livery, wing panels and number graphics for BriSCA F1 stock cars, built around the big roof wing, the grading colours and the repairs a full-contact season brings.

Discuss your projectCall 01603 987222
Designed for your BriSCA F1 stock car

The big wing is your billboard.

BriSCA F1 stock cars are the top formula in British oval racing: powerful, open-wheel cars with a large roof-mounted wing and heavy bumpers built for contact. The wing is the first thing the crowd and officials see, so its colour, number and sponsor space need careful planning.

We design F1 graphics around the car you actually race. That means the wing side plates and top, the roof plate, the cockpit sides and the engine cover, each sized from your measurements. With tracks such as King's Lynn, Mildenhall and Ipswich on the calendar close to our Norwich base, we can turn panels round quickly between meetings.

Complete graphics care packages

Prepare before fitting. Protect after application.

Either package can be added to a car, van, fleet or race vehicle graphics project. Tell us what is being fitted and we will coordinate the care appointment with production and installation.

Vehicle receiving a thorough pre-graphics wash and surface preparation
Before application

Pre-graphics valet & preparation

From £80

Give the vinyl the cleanest possible foundation. A professional decontamination wash removes traffic film, wax, grease and bonded residue that can compromise inspection, positioning and edge adhesion.

  • Cleaner surface for vinyl adhesion
  • Earlier identification of tar, fallout and paint defects
  • Less fitting time lost to avoidable contamination

Final preparation depends on paint condition and the selected graphics. Paint repair, glue removal and heavy contamination may be quoted separately.

Freshly finished vehicle protected with a gloss-enhancing ceramic coating
After application

Post-graphics ceramic protection

From £250

Add a compatible ceramic coating after the graphics or wrap has settled. It can deepen gloss, make routine washing easier and reduce the way road film and environmental contamination cling to the finished surface.

  • Easier maintenance of vinyl and surrounding paint
  • Added gloss and contamination resistance
  • A protection plan matched to the vinyl finish

Ceramic coating does not make graphics damage-proof. We confirm vinyl compatibility, finish and curing time before recommending the coating system.

Layouts and coverage

F1 graphics, panel by panel.

01

Grade wing and roof panels

White, yellow, blue or red panels for your grade, with space for the amber lights superstars must carry.

02

Champion wings

Gold, silver, black-and-white chequered or red-and-yellow chequered wings, produced for the title the driver has won.

03

Wing numbers and name boards

Large black-on-white numbers on the wing side plates, plus driver name and hometown boards on the cockpit.

04

Full sponsor livery

Engine cover, cockpit and wing faces laid out with a clear sponsor order, so your partners stand out in photos and on video.

F1 stock car with a teal, orange and white geometric livery on the roof wing and body, cornering on a sunny oval
A bold geometric livery that reads clearly across the big F1 roof wing.
Artwork, material and finish

Planned for the season, not just the first meeting.

F1 grades follow your results over a set number of meetings, so you may race in more than one colour each year. We keep a master file for your car and can produce the next grade colour, or a champion's wing, without redrawing your numbers and sponsors.

Contact is part of every race. We recommend a spare set of the parts that take the most damage, usually wing side plates, numbers and front sponsor panels, labelled left and right so your crew can swap them in the pits or the workshop.

The material for each panel depends on its shape and how you clean the car. Shale, oil and pressure washing are tough on graphics, so we discuss laminate and film choice for each area before production. Please send the current BriSCA F1 regulations or any steward guidance you have been given so the colours and numbers match what officials expect.

A quote shaped around your brief

BriSCA F1 Stock Car Graphics prices and fitting.

Price depends on the number of panels, the grade or champion colours needed, the size of your spare set, sponsor artwork and whether we fit the graphics. Spare panels ordered with the main livery usually cost less than single replacements later. Prices are plus VAT unless stated otherwise.

Design, production and fitting are coordinated at our Norwich graphics centre, serving customers across Norfolk. Confirm your preferred supply or fitting route when you enquire.

Request a tailored quote
From the first idea to the BriSCA F1 stock car

How your brisca f1 stock car graphics project works.

01

Measure the car

Send panel measurements, photos and your grade and number.

02

Design the livery

We lay out the wing, roof and body with your number, name and sponsors.

03

Approve and produce

Check the proof, then we print, laminate and cut each labelled panel.

04

Race-ready

Collect the kit or book fitting at our Norwich centre before your meeting.

Advice and services

Plan your graphics project.

Compare services and find advice on artwork, materials and fitting.

British stock car graphics

Grade colours, numbers and spare panels for every stock car formula.

Explore

Sponsor graphics

Organise sponsor logos so each partner gets the right space.

Explore

Plan team graphics

Keep multiple cars, support vans and spares consistent.

Explore

Fitting in Norwich

Plan your visit to our Norwich graphics centre and discuss the vehicle before booking.

Explore
Related graphics and wrapping

Find the right treatment for your BriSCA F1 stock car.

View all stock car graphics →
British stock car with a Union Jack livery on its roof wing and body, racing on a wet floodlit oval

British Stock Car Graphics

British stock car graphics for BriSCA F1, F2 and oval racing: grade-colour wing panels, black-on-white numbers and sponsor livery. Norwich, Norfolk.

Explore service →
Stock car with a white, purple and lime livery on its roof wing, racing past the grandstand at sunset

BSCDA Driver Graphics

Graphics for BSCDA stock car drivers in BriSCA F1 and V8 HotStox: name boards, numbers, grade panels, sponsor livery and spares. Norwich, Norfolk.

Explore service →
Race car sponsor graphics specialist positioning colourful authorised partner decals on a touring car in a motorsport garage

Race Car Sponsor Graphics

Race Car Sponsor Graphics in Norwich. Plan logo sizes, sponsor hierarchy and panel placement using approved artwork. Ask about production and fitting.

Explore service →
Replacement race graphics concept with turquoise and orange livery and matching vinyl on a workbench beside a race car

Replacement Race Car Graphics

Replace damaged race livery panels, sponsor decals and number graphics. Artwork checks, colour matching assessment and vinyl production from Norwich, Norfolk.

Explore service →
Colourful vehicle-specific vinyl graphics available to shop for cars and vans
Shop Vinyl Graphics

Choose graphics for your exact vehicle.

Select car or van graphics, then choose the manufacturer and model. Product pages include design routes, colour references, application guidance and ordering options.

Shop car graphicsShop van graphics
Before you book

BriSCA F1 Stock Car Graphics FAQs.

Why do BriSCA F1 cars have different coloured roofs?+

The roof and wing colour shows the driver's grade: white, yellow, blue, red, and red with flashing amber lights for superstars. Higher grades start further back, so the crowd can follow who is coming through the field.

Can you make a gold World Champion wing?+

Yes. We produce champion wings for the driver who holds the title: gold for the World Champion, silver for the National Points Champion, black-and-white chequered for the British Champion and red-and-yellow chequered for the European Champion.

How quickly can you replace a damaged wing panel?+

If we already hold your artwork, a replacement can often be turned round quickly. Tell us the meeting date and which panels are damaged, and we will confirm a realistic timeline.

Can my sponsors go on the wing?+

Usually yes. The wing faces give the most visible space on the car, but the number must stay clear. Send your formula's current rules and we will keep the number area free of sponsor artwork.

Do you fit F1 stock car graphics?+

We can fit at our Norwich graphics centre, or supply a labelled kit so your crew can fit panels at the workshop or in the pits. Many drivers do both: we fit the full livery, then they swap spares during the season.

Are you an official BriSCA supplier?+

No. We are an independent graphics company. We work to the regulations you supply and only add association or championship logos when you have permission to use them.

Race Car Graphics · Norwich

Discuss your brisca f1 stock car graphics.

Send the vehicle details, preferred design and target date. We will review the brief and confirm the artwork, production and fitting options.

01603 987222

Unit 5 Consensus House, St Faiths Road, Norwich, Norfolk, NR6 7BW.

Your details are sent securely to the Race Car Graphics team.